Certificate in Printer Repairing Level 1

Course Name:Certificate in Printer Repairing Level 1

Course Duration: 3 months

Course Fees:15,000

Syllabus:

Types of printers

1. Dot Matrix(136 columns,80 columns)
2. Inkjet Printer.
3. Laser Printer.
4. Multifunctional Printer.

 

A.Dot Matrix Printer 

Introduction of Matrix.

1. Assembly Disassembly.
2. Gear assembly setting.
3. Fault finding,
4. trouble shooting.
5. Logic board(partly).
6. Paper sensor.
7. Tractor assembly.
8. Service manual reading.
9. Driver installation.
10. Working and fixing of components.
11. Setting of IP, IO card, ETO / Jet direct, Wi­Fi etc.

 

B. Inkjet Printer 

1. Introduction of Inkjet.
2. Assembly Disassembly.
3. Head cleaning unit.
4. Testing of cartridge
5. Manually cleaning of head using chemical.
6. Fault finding, trouble shooting.
7. Replacing trailing cable.
8.  Function of encoder strip.etc..
9. Working and fixing of components.
10. Service level setting.

 

C. Laser Printer 

1. Introduction of Laser.
3. Assembly Disassembly.
4. Function of laser & H.O.T, SMPS, logic board (partly).
5. Special Precautions & Prevention for Laser Printers.
6. Working and fixing of components, step motors, sensor, toner, fuser.
7. Setting of IP, IO card, ETO / Jet direct, Wi­Fi etc.
8. Fault finding, trouble shooting. Alignment of Laser Printer.
9. Code identification, error code solving.
10. L.S.U head unit.
11. Motion of machine.
12. Printer configuration setting etc..
13. Testing ofLaser toner cartridge and tools.
14. Testing of cartridge. Service level setting

 

Driver installation:

1.  Creating virtual port.
2. Raw file format.
3. Common Driver installing.

 

D.Multifunctional Printer Syllabus.

 

1. Introduction of Laser. Assembly Disassembly.
2. Sensor.
3. A.D.F (Atomic Document Feeder).
4. Pick up (for pulling paper.)
5. Setting of IP, IO card, ETO / Jet direct, Wi­Fi etc.
6. Fault finding, trouble shooting.
7. Alignment of Printer.
8. Precautions & Prevention of Printers.
9.  Service level setting.

 

 

Driver installation

1. Creating virtual port.
2. Raw file format
3. Common Driver installing.

 

Basic tools required for printer repairing.

Screw driver set, pipe syringe, I.P Solution, tissue, small blower etc..